Case for DPS5005 and DPS5020 Ruideng (RIDEN, RD Tech) with 200W PS Velika S-200-48
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed two halves of a power-supply cover for the DPS5005 and DPS5020 from Ruideng (RIDEN, RD TECH) which fits…
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 54
- Wydruki
- 0
- Wyświetlenia
- 1273
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
I designed two halves of a power-supply cover for the DPS5005 and DPS5020 from Ruideng (RIDEN, RD TECH) which fits perfectly with the 200W, 48V switching powersupply from Velika.
As powerswitch, I am using an Inlet Combi-Module C14 with a lit powerswitch from RND Connect.
For the DC-outlets, I am using 4mm safety sockets SEB2610F from Hirschmann.
The powersupply only has one M3-threaded hole on the front side. I added a second possibility so you can drill a 2.5mm hole and tap it into the powersupply for more stability
Parts print in PLA, 0.2mm, 100mm/s, 10-15% infill, no supports.
For easy remixing, I added the OpenSCAD files.
BOM:
DPS5005 Ruideng
DPS5020 Ruideng
https://www.aliexpress.com/item/32821185351.html?spm=a2g0o.detail.1000023.9.26dafc26AMnhV0
Switching Powersupply Velika https://www.aliexpress.com/item/48V-4A-200W-Switching-Switch-power-supply-Driver-AC110-220V-for-Led-Control-CNC-CCTV-Stepper/32750973254.html?spm=a2g0s.9042311.0.0.2c544c4dzvrrwR
Inletmodule:
Safetysockets 4mm:
https://www.reichelt.de/einbaubuchse-4-mm-faston-rot-gesichert-seb-2610f-rt-p106130.html?r=1 https://www.reichelt.de/einbaubuchse-4-mm-faston-schwarz-gesichert-seb-2610f-sw-p106129.html?&trstct=vrt_pdn
3 (4) pcs M3x10 Hex cylinderhead
Update July 28 2019: I added a modified front model to also fit a DPS5020 with the same Powersupply. Back cover is the same like 5005 version.
PS will still only deliver 200W max with DPS5020 but you get 4 times higher amperage at up to 10V and 2 times up to 20V. The ventilation openings for the fan might be a bit tiny but at 200W, I think it should be good to go.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
10%
Filament: Noyes PLA black/aluminium
Category: Electronics