Opera balcony, 3-part, pluggable, wall mounting possible, lighting possible
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An opera balcony, composed of 3 parts, pluggable, wall-mountable, lighting possible, for placing e.g. Mini 13, Dummy 13
- Ocena
- 0 / 5
- Polubienia
- 22
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 282
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props & Terrains
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
An opera balcony, composed of 3 parts, pluggable, wall-mountable, lighting possible, for placing e.g. Mini 13, Dummy 13, Lucky 13 figures (print at 150%).
I made it for the figures of statler and waldorf from Alex as you can see at the title picture.
The chair for the balcony, as seen in the picture, is also available.
The size is about 1:10 of real life.
Printing instructions:
0.4 nozzle
0.2mm Structural
Supports
Balcony base: no support
Middle part: Organic For support enforcers only
Top part: no support
15% infill
for color prints a MMU or other Multicolorunit is needed, use preconfigured .3mf files
Assembly and wall mount:
Press the middle section down into the balcony base, then press the top section down into the middle section.
If you like to have a light installed use samples like below and fix it with double adhesive tape into the top part.
