Tug boat Kirchwerder 19 / Bugsier 19
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
German harbour tug boat slepper Kirchwerder / Bugsier 19
- Ocena
- 5 / 5
- Polubienia
- 67
- Pobrania
- 789
- Wydruki
- 2
- Wyświetlenia
- 2901
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Dear modelers, This is a project of mine, the German harbor tug Kirchwerder 19 (later the Bugsier 19).
As a teenager, I couldn't afford the Bugsier 3 kit, and now they're no longer available. Recently, I was organizing my late father's shipbuilding plans and found the 1981 plans for the Kirchwerder 19 (later Bugsier) from the German magazine Model-Werf. The more powerful sister ship of the Bugsier 3. I couldn't resist and had the drawings scanned and started drawing in Autodesk Fusion.
The tugboat is 1:33 scale, making it approximately 80cm long. Given the boat's scale, many parts are quite small and will therefore need to be printed with a resin printer. The hull and superstructure can be printed with an FDM printer.
I've made significant progress in printing recently, see photos. I'm also working on some kind of construction manual.
The engine mount is for a large Johnson, I think a 775 or 785.
I use a propeller shaft tube with a diameter of 10 mm, which is a common size on AliExpress. The total length of the propeller shaft is 25 cm. Propeller shafts with a small tube are handy for adding grease without removing the shaft. The ship's propeller (4 blade) has a diameter of 55 mm and is also from AliExpress.
To mount the rudder bar, I used two M2 inserts and M2 bolts.
The project is finished and no additional parts will be added. If I have missed anything that is included in the drawing, you will have to make it yourself.
Have fun building and don't forget to publish photos of your build, I would really appreciate that.
Greetings Rene76
update 6-7-2026 I forgot to publish the three bollards on the aft deck.