Woodworking Spacers / Gauges / Setup Blocks - Imperial
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Blocks to aid in woodworking assembly.
- Ocena
- 5 / 5
- Polubienia
- 161
- Pobrania
- 741
- Wydruki
- 2
- Wyświetlenia
- 2745
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
Some Spacers / Gauges / Setup Blocks for woodworking. These are really useful when building cabinetry and other projects.
In addition to the different thicknesses, all blocks have outer 1" x 2" dimensions so can be used as gauges for those dimensions as well.
Instructions for printing:
Perfect prints for PLA, but would work with any filament.
I did 8% Gyroid infill... but again, anything would probably work.
You may need to calibrate your printer in order to get more accurate parts. I printed this on a Bambu Labs P1S and all dimensions were within +/- 0.003".
I set the tolerance in the tray so it's a loose fit around the blocks - if it's still too tight for your printer, you can use the link below and modify the singular Tray_Fit_Tolerance variable to increase the clearance for all pockets.
Make sure to go in and set the lettering part of the models to a different color in your slicer. This can be printed on any printer/slicer - is really easy with printers equipped with automatic material changing systems.
If your slicer has a Precise Z setting - turn that on. It will make your prints closer to the actual dimensions.
I did a color change to get the tops of the trays to print in black just for aesthetics - not necessary to do.
I've also shared the OnShape link I used to create them if you want to copy/modify (or make a metric version):