Led Pod Light Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Universal Led Pod Light Mount
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 387
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Standard Digital File License
Created to allow you to mount an Led Pod Light to your vehicle application without drilling holes. (I hate having to drill holes.) It has a 9mm opening that a bolt under my bumper (M8) slid into with plenty of thread still going through original mounting solution, and a 13mm hole allowing the m12 bolt that came with my specific pod lights to pass through. I did have to mount the pod light hardware first, as the clearance between the two bolt holes is tight, but it all worked out well in the end.
Printed in green PLA for visuals, but at 50% infill, its quite strong. Would recommend printing with a more ideal material like ABS or Carbon filaments.
It was printed on its side utilizing supports and turned out pretty well as you can tell from pics. Would recommend using a minimum infill of 35%, but if you think you can get away with less, that's your call to make.
I'm not saying it would survive something like the BAJA 1000, but it seems to be plenty strong for reverse trail lights.
Please note, this is a Universal Mount. It is currently on a 2015 Ford F150, and may or may not work on your specific application. You are more than welcome to make a variant of your own, even if it looks completely similar.