1 / 11
C-Note Speaker Cabinet and Brace (Cut to fit on smaller printers) — zdjęcie 1
1 / 11

C-Note Speaker Cabinet and Brace (Cut to fit on smaller printers)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I love the C-Note speakers that I built but wood working really isnt for me. So I drew up the standard cabinet!

Ocena
0 / 5
Polubienia
10
Pobrania
41
Wydruki
0
Wyświetlenia
418
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Audio
Licencja
GNU General Public License v3.0

I love the C-Note speakers that I built but wood working really isnt for me. So I drew up the standard cabinet and cut it up to fit on normal sized printers like the MK3(S)/Mk4(S). They are quite hefty and my build came out to a little over 3 kg total for the pair.

Printable with very few supports. Print the baffle pieces on their front. Print the body pieces on their backs. Use M4 Heat Set inserts for the screw holes. 

For the brace... it goes in the center to reinforce the glue joint. Print it flat with honeycomb infill (20%) and no top or bottom layers. This will still be strong and will limit how much internal volume is take up by the brace.

Line the inside of the cabinets with your favorite sound damping foam. I used a 1 inch egg crate style mattress topper.

For the pcb mount I simply used a drop of hot glue on each corner post. Then glue the mounts with hot glue to the bottoms of the interior.

Glue everything together with 30 minute epoxy.

Added frequency response and distortion graphs.

Tagi