Gift Box #23 Print-in-Place Version
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is the 23rd box in a series of gift boxes that may all look the same but each have a different way of opening.
- Ocena
- 5 / 5
- Polubienia
- 28
- Pobrania
- 123
- Wydruki
- 2
- Wyświetlenia
- 686
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter & Christmas & New Year's
- Licencja
- Standard Digital File License
This is the print-in-place version of the twenty third gift box in a series of gift boxes that may all look the same on the outside but each has a different secret way of opening. I you would rather print the multi-part/color version, it can be found here. Or find the entire collection of my boxes here.
To unlock this box, you turn the very center of the bow. used square gears to drive the locking mechanism. It prints without support because some clever bridging and those four posts around the sun gear. When you turn the center of the bow 45 degrees, it rotates the gears unlocking the corner gears from the box allowing the top to be removed.
Print Instructions
Its roughly 100mm x 100m x 80mm tall. The top and bottom print in place as one part with supports. Too much friction? Try PTFE Lubricate Spray(aff). This stuff is amazing and just a little bit will majorly help to smooth the motion.
Printed on the Prusa Core One(aff.) with Polymaker Sparkle Green.
Support and Licensing
If you would like to help support more free models or get permission to sell physical copies of my models, consider joining my Clubs Membership or using my Prusa Shop Affiliate.