Hex Coaster with Holder - Minimal and Stackable
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Minimal hexagon coasters with inlay to collect condensation. Stackable holder and clean, modern design.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 114
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
A minimalistic hexagon coaster set with a matching holder, designed to look clean and modern on any table or desk. Each coaster features a subte inlay pattern that helps collect condensation, keeping your table dry and clean.
The holder keeps up to 6 coasters neatly stacked when not in use, making the set both practical and visually minimal.
The design is optimized for easy 3D printing without supports and works well with common materials like PLA or PETG.
Recommended print settings:
Layer height: 0.2 mm
Infill: 15-20%
Walls/Perimeters: 4-5
Outer wall speed: 30-40 mm/s recommended for best surface finish
Supports: Not needed
Material: PLA or PETG
Feedback and suggestions are appreciated!