Märklin H0 modular Bridge - Snap-In-Connector / Märklin H0 modulare Brücke - Verbindungselement
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Snap-In-Connector to connect elements of the Modular bridge system for H0 model railway (Rail-C).
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 163
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution
When building a temporary model railway bridge or ramp, you need pillars with various sizes.
Using Lego for this purpose did not look too realistic.
For this reason I designed a pluggable model railway pillar system, that allows you to create any pillar height you need.
For a more realistic look of the bridge I designed a number of rail elements for the Märklin Rail-C rails.
The elements fit on top of the modular Bridge pillar system and can be connected with snap-in-connectors.
The design leaves enough tolerance for the changing slopes needed for the bridge ramps.
The Märklin Rail-C system is intended to be used with for use with our design.
Many related parts using this Snap-In-Connector can be found here:
https://www.printables.com/@OBA_97489/collections/2316751
Printed with prusament PLA (Gentleman's Grey)
To build a complete ramp or bridge with ramps, you need quite a number of pillars, rail elements and connectors.
Material: PLA/PLA+/PETG
Orientation: left or right side
Colour: Gentleman's Grey (less important, as the connectors are not visible i assembly)
Support: Brim is recommended.
Hint: Print batches with more than 2 connectors in one go.