Yukon oval hood plug
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
One model to “bling” the underside of the hood
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 27
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Public Domain
Wanted to add some flair to my wife’s GMC Yukon Denali—the engine compartment side of the hood. Open most vehicle hoods; they’re complete with an array of manufacturing holes. Some manufacturers plug these holes, whereas others do not. In this vehicle, 2023, there are quite a few different ones; this is the larger oval.
I carefully dimensioned each opening and modeled them up in Creo parametric. This is this first one I’ve perfected and printed. Consider it the first in the series; I’ll publish the others as time allows.
The pieces fit very well, they do require some mild persuasion to install due to the holding feature having back-draft. This was intended to prevent them falling into the moving components.
I printed in PLA—I’ll report back on how this design/material withstands the heat within the engine bay. Since my machine doesn’t do well in other filaments, I may need to redesign. I’m ok with a fail here and there. The image shows glow in the dark material; this is not approved by my wife but her color hasn’t arrived yet so I printed what was already in the machine