1 / 2
K40 Air Assist - Mix and Match
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mix and match for your tube size. Included is a 4mm attachment for most coiled air hoses.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 37
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Public Domain
Mix and match for your tube size. Included is a 4mm attachment for most coiled air hoses.
Suggest super gluing each part from below once seated (bit of Bicarb soda will set it up immediately). Don't put any glue on the inside, we don't want the hole closed.
Included is 6.6mm cylinder, you can get the correct hose fitting from Fusion 360 McMaster-Carr parts catalogue, split and attach to the peg.
You need 2 x 3.5mm screws to help hold in the main body
