Universal flexible bumper for MBot2 / Mbot Neo
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A flexible bumper for the Makeblock MBot2 (MBot Neo). It fits the front and the back.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 59
- Wydruki
- 0
- Wyświetlenia
- 158
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Share Alike
A flexible bumper for the Makeblock MBot2 (MBot Neo). It fits the front and the back.
The design features flexibility in all directions and rounded corners, which is great when the bot is driving against your furniture or walls.
Although the bumper is flexible, it is still quite sturdy and will not break easily.
The bumpers are fixed with 2 screws on each side. Please see pictures, which screw holes to use for font and rear.
You can use M4 screws (either metric or self-tapping). Screw length should be 6 to 8 mm.
I recommend flat head or lens head screws, like those in the picture.
For best results, print with PETG, use 2 solid outer shells and 30% infill (rectilinear 45°).