1 / 2
Radius gauge - Rocoline and similar H0-tracks
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tool to glue the cork bed in right radius for H0-tracks
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 160
- Wydruki
- 0
- Wyświetlenia
- 1564
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (25)Powiązane
Tool to glue the cork bed for HO-Tracks. Designed for the Rocoline and similar tracksystem.
With this gauge you have always de right distance between these both lines.
Easy clip-in system. Each segment is the same size like the track.
available R2 and R3.
Printer: Ender 3V2
Material: PLA-R
Resolution: 0.2
infill:25%
supports: No