Irwin Quick Clamp Holder for DDD Wall Control System
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holds 4 Irwin Quick Clamps using the DDD Wall Control system
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 185
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a tool holder for 4 Irwin Quick Clamps
These are usually really annoying to hang on a pegboard, but this keeps them in a nice straight line.
Use it with 2x2 Angle Brackets from the DDD system to mount on your board. I also included files for the brackets with a slightly thinner back hook that fits better in my Wall Control board.
I printed the tool holder in PLA+ with 40% infill and 3 walls. If you print it on its back, you should only need some tree supports for the side pegs.
I printed the angle brackets holder in PLA+ with 40% infill 15 walls, and no supports.