Owl of Minerva Sculpture
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Owl Sculpture, Goddess Athena Symbol, Bird of Wisdom, Ancient Greek Art, Museum Replica. For the philosophers.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 49
- Wydruki
- 0
- Wyświetlenia
- 213
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution — Noncommercial
"The owl of Minerva spreads its wings only with the falling of the dusk."
— G.W.F. Hegel
This model is a recreation of the classic "Owl of Minerva," the eternal symbol of wisdom, philosophy, and insight. According to Hegel, wisdom only truly takes flight as an era matures and comes to a close. This piece is designed to capture that contemplative, stoic essence, making it a perfect centerpiece for a library, office, or studio.
Printing Specifications
This is a tall model designed for the largest height many printers can accommodate. Two versions are included: Unsupported for custom support placement, Pre-Supported Version: Includes built-in supports and stabilizers specifically engineered for this model’s height.
Recommended Settings:
Nozzle: 0.4 mm
Layer height: 0.2mm, optionally use variable layer height to make finer layers at the top of the model.
Walls/Perimeters: 3 perimeters for the body and the base; 6–7 perimeters for the vertical post to ensure structural integrity.
Infill:
Base: Gyroid infill provides excellent multidirectional strength and because voids are interconnected.
Body/Top: Minimal 10% or Lightning infill to keep it light and prevent wobbling during the final stages of the print.
Scale: Designed for a height of 230 mm, but the geometry is manifold and can be scaled to fit your specific printer volume.
Post-Processing & Finishing
The vertical post has a hole in it for inserting an optional screw to add strength and to help attach it to the owl body. Attach the post to the owl first and then insert it into the base.
To give this piece the weight and "soul" of a museum artifact, I recommend the following:
Weighting the Base: Make the base hollowed with only 5% gyriod infill and used a modifier shape in your slicer to omit the base layers in a small area to leave a hole for filling. I used a mixture of Plaster of Paris and sand to give it a substantial, premium feel that prevents it from tipping.
The "Ancient Gold" Technique: 1. Prime the entire model in Matte Black. 2. Using a "dry brush" technique or light misting, apply Gold or a lighter metallic/stone color over the top. 3.This leaves the black primer in the deep recesses, highlighting the details and giving the piece a weathered, timeless look.
Bonus Tip: For an extra high-end, luxury feel, add velvet backing to the bottom of the base.
