Gridfinity 2x2 Hex Bit Holder - Heavy Duty
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A robust Gridfinity 2x2 block for standard 1/4" hex bits. Features reinforced walls for durability.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 68
- Wydruki
- 0
- Wyświetlenia
- 265
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Public Domain
The ultimate Gridfinity block for your screwdriver bits. This 2x2 module is designed to hold standard 1/4" (6.35mm) hex bits. It features a reinforced design intended for daily workshop use.
Key Features:
Heavy Duty: Designed to be printed with 3 walls for maximum stiffness.
Perfect Fit: The holes have a slight tolerance offset so bits slide in smoothly but stay upright.
Clean Finish: The top surface is optimized for Ironing settings to get a smooth, professional look.
Print Settings (Recommended):
Material: PETG (Preferred) or PLA+.
Walls/Perimeters: 3 Walls (Critical for strength).
Infill: 15% Gyroid.
Top Surface: Enable "Ironing" (All top surfaces) for a super clean result.
Adhesion: Use a Brim if printing in PETG to prevent warping.