Snap-In Wago 221 3-Way Junction Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Flat, 3-way junction box for Wago 221 series wire clamps.
- Ocena
- 5 / 5
- Polubienia
- 461
- Pobrania
- 871
- Wydruki
- 3
- Wyświetlenia
- 5850
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Model Description
Flat, 3-way junction box for Wago 221 series wire clamps. This model is heavily inspired by a design shared by https://www.printables.com/@geroulas. This version features a more rigid hold on the Wago clamps by using a compliant snap-in mechanism and hexagon shape. Otherwise I tried to replicate all the features from the upstream model.
ASMR demonstration of the quite satisfying snap-in action: https://makertube.net/w/pyuTUNYmwNfWAaDh9wJ6Vp :)
Printing
Wago 221 series is rated to ambient temperature up to 85ºC so a Flame Retardant (UL 94 V0) filament type should be used which also matches the temperature rating of the clamp. PTEG or better ABS are good choices. Do not use CF variants as carbon is electrically conductive.
The lid needs to be printed upside down. No support structures are necessary.
Remixing
use either the attached STLs or the OnShape Project: https://cad.onshape.com/documents/f975c60949c2366f473a068e/w/5ac4209302856b510c29a303/e/968612dffb756501b0102f0b?renderMode=0&uiState=694f146626f810cdc93e246e
Disclaimer
I am publishing this for informational purposes only and do not endorse usage of this model in house electricity installation operating at mains voltage. Use at your own risk.