Cake mould / cheesecake tin (loose base)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A circular loose-bottom tin for non-bake cheesecakes. 20 cm diameter x 4.5 cm hight.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 63
- Wydruki
- 0
- Wyświetlenia
- 472
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
A tin or mould ideally for a non-bake cheesecake. Found myself needing one of these after realising I didn't have this size or shape! The base and rim print together but are physically separate, providing a snug but easily removable base. Printed with PLA on Prusa i3 MK3S+. The walls and base are 2.5 mm thick and requires around 150 g filament at 20% infill. Printed at 0.3 mm layer hight to save time.
I have also made Heart and square shape versions. Hope you enjoy!
Disclaimer: this is not for baking, do not put this in an oven. Baking paper should also be lined over plastic to protect food.