1 / 2
Remix of the pin and main body y1 for Sandeagle's “PrintClosure Project”
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Increases the strength of the pin and corrects a hole in Y1.stl (As of December 2025)
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 54
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a revision of pin.stl, which is used to connect the parts, and of the part “y1.stl,” in which a bore diameter is incorrect. I have flattened the pin so that it can be printed lying down and offers maximum strength. I have also added a small chamfer.
In y1.stl, the bore is now 3.2 mm.