NB Miata 3rd Brakelight Gasket Mould
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Now that we can't find the gaskets for the third brake ligh on the NB Mazda Miata's, I've created this mould to make em.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 101
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I searched and searched to find a gasket for the center brake light on my 2000 Miata. I came up with nothing, or an overpriced reseller. I decided to make this mould to help make silicone gaskets myself. The mould is kind of a pain in the ass to make, but once you get the support material out, it's significantly easier to make gaskets! Mine now works perfectly!
Make sure you print with support! It's required in order to get the correct angles. The support is a PITA to get out once it's finished printing, but you really only need to do it once...
I used red silicone maker, works great, but the silicone does need some adhesive to stay in place. I did not use adhesive and it wore and fell down at the bottom.