1 / 4
(REMIX) Antivibration Frame Kobra 3 v1/v2 Hex bolt version (no drilling) — zdjęcie 1
1 / 4

(REMIX) Antivibration Frame Kobra 3 v1/v2 Hex bolt version (no drilling)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Remix of the original model featuring bigger holes that allow for use with hex bolts

Ocena
0 / 5
Polubienia
8
Pobrania
43
Wydruki
0
Wyświetlenia
341
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

(original description with some changes)


This project adds a rear bracing system to the Anycubic Kobra 3 V2 without drilling or modifying the printer.

Two diagonal threaded rods stiffen the frame, reducing vibrations during high-speed printing and improving surface quality.

 

Required materials

 

2 threaded rods M10 × 500 mm

 

8 × M10 nuts

 

8 × M10 washers (wide type recommended to spread the load)

 

8 × M5 screws (10–15 mm long) for mounting the brackets to the 2020 aluminum profiles

 

Recommended filament: PETG or ABS (PLA works, but it’s more brittle and heat-sensitive)

 

Infill: 60% (I recommend 100% if you print it with pla) (grid or gyroid)

 

Perimeters: 5–6 walls

Tagi