Filament Vacuum Attachment
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A vacuum attachment for a smaller vacuum end (30mm tapered to 33mm over 33mm length) from a Ryobi cordless.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 49
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
Made this vacuum attachment for use on my Ryobi cordless vacuum with a smaller nozzle size for attachment. The Ryobi nozzle end is tapered to which made other models not fit snug and could be problematic as they would fall off.
The other design feature was for a much longer nozzle so I could reach into the extra large zip lock bags without needing to scrunch them up as much. Works well with the large bags as well.
There are two vacuum relief holes close to the attachment. This was done so as not to burn out the vacuum when the bags are dry of any further suction. Not sure if the hole is big enough to satisfy the reasoning.