1 / 5
REPAIRED__raspi_bottoms__1_05-rpXXXXX - for Sneaks' Raspberry Pi cases — zdjęcie 1
1 / 5

REPAIRED__raspi_bottoms__1_05-rpXXXXX - for Sneaks' Raspberry Pi cases

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Fusion360 "repaired" versions of 4 different bottoms of the case(s) designed by Sneaks.

Ocena
0 / 5
Polubienia
0
Pobrania
45
Wydruki
0
Wyświetlenia
456
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Please see Sneaks design for all information and instructions.  

  • When I loaded the __raspi_bottom__1_05-rp3bp STL file, Prusa Slicer noted 64 errors. 
  • When I loaded the __raspi_bottom__1_05-rp3bp-v75 STL file, Prusa Slicer noted 398 errors.
  • When I loaded the __raspi_bottom__1_05-rp4 STL file, Prusa Slicer noted 64 errors. 
  • When I loaded the __raspi_bottom__1_05-rp4-v75 STL file, Prusa Slicer noted 140 errors. 

PrusaSlicer did not note any errors with the 2 SS versions of the bottoms for Sneaks' cases, files __raspi_bottom__1_05-ss_3bp.stl and __raspi_bottom__1_05-ss_4.stl.

Further, and to Sneaks credit, Fusion360 did not identify any errors.  I still did the “Stitch and Remove” option in Mesh Repair, then saved/exported a new STL/3MF.  This resolved whatever issues PrusaSlicer found.  

I'm sure some people just let PrusaSlicer repair the object and it was fine.  I simply created these “repaired” files because I have wasted a lot of filament by allowing PrusaSlicer to do repairs for past prints.  I hope someone finds these useful.

Tagi