Extended segmenter-R4 for MMU3
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An extended segmenter-R4 for the original MMU3 Buffer. Allows PTFE tubes longer than 450mm.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 190
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- GNU General Public License v2.0
If like me, you want to use the CoreOne MMU3 Lite mod you will very quickly realize that the buffer is not larger enough for the original PTFE tube that came with the bare CoreOne (610mm while the MMU3 Lite version uses a 450mm tube). To "quickly" resolve this I took the original STL file of the segmenter-R4 and stretched it by 150mm, giving me more than enough extra space for the original buffer to work with the longer PTFE tube.
The extended segmenter is a straight bolt-on replacement for the original short segmenter-R4 and requires no additional modifications.
Print with PETG, 2-3 perimiters, infill (10-15%), bottom side up for best results.