1 / 1
Spring for a Pot Maker
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Turn 4"/10cm strips of newspaper into upcycled pots for seedlings.
- Ocena
- 4,5 / 5
- Polubienia
- 4
- Pobrania
- 42
- Wydruki
- 2
- Wyświetlenia
- 320
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 2) (Komentarze: 3)Remiksy (0)Kolekcje (24)Powiązane
Spring for a Pot Maker
Spring (for me anyway) is just around the corner and it's time to start thinking about getting the seeds started. Growing up, my parents had one of these, turned out of wood. Actually, they still have it – that's the reason I had to make my own. This one makes pots with a diameter of 55mm/~2" and up to 60mm high.
Printed in PLA with three perimeters and 10% infill.
To make pots:
- rip a section of newspaper into 4"/10cm strips and wrap one strip around the pestle. It should go around 3 or 4 times and overhang the end with the indent by a couple centimeters or so.
- Fold the bottom over – I use four folds, alternating around like a compass: North, South, East, West.
- Press the pestle into the base and give it a twist.
And that's it, you have a pot. Fill with dirt, your favourite seeds and get that garden growing.
Have fun!