Water Level Plunger for Taylor K-1004 Pool & Spa Test Kit
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Wstępna wycena dla PETG
0,35 € – 0,43 € netto (bez VAT)
Dla pliku: taylor_plunger_v1_0.4n_0.2mm_PETG_MK3.5_32m.bgcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 0,39 € netto (środek widełek).
- Masa podana przez autora
- 2 g
- Czas druku podany przez autora
- 31,8 min
- Materiał u źródła
- PET
- Materiał wyceny
- PETG
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
A simple tool to get precise water levels in your Taylor K-1004 test kit comparator vials.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 79
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- GNU General Public License v3.0
A simple tool to get precise water levels in your Taylor K-1004 test kit comparator vials.
The problem: The test kit requires filling vials to a specific line, but it's tricky to get the level exactly right - especially with the angled surfaces near the top of the vials.
The solution: Overfill the vial slightly, insert this plunger until the flange rests on the rim, and remove. The displaced water overflows, leaving you at the correct fill line.
Printing:
Print with the paddle facing down
Supports required under the flange
PLA or PETG works fine
Designed for the rectangular comparator vials in the Taylor K-1004 kit. May work with other Taylor kits using the same vials.