1 / 6
Taste of Beauty (Binomi) / MARETU - Vocaloid Disc Prints — zdjęcie 1
1 / 6

Taste of Beauty (Binomi) / MARETU - Vocaloid Disc Prints

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Binomi disc model I made for my music box project. It's also surprisingly fun to paint.

Ocena
0 / 5
Polubienia
5
Pobrania
16
Wydruki
0
Wyświetlenia
82
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Song: Taste of Beauty (Binomi) / MARETU - https://www.youtube.com/watch?v=fGizrX4JjPg

This is modelled after MARETU's song Taste of Beauty (or Binomi) which is used to represent the song for my music box project. I made it using Fusion 360 using image reference to extrude the design on a circular disc. I also attach RFID sticker at the back so I can play the music to a 3 watt speaker when I scan it with my RFID reader. It's also a very fun painting project.

There are two STL files. One is just the design and other has two 8x2.5mm magnet holes with 0.4mm tolerance.

I used standard PLA with tree supports at 0.3mm resolution with 3 wall lines no brim. I find supports for the magnet hole not necessary but it depends on the 3D printer bridging capability. Infill can be whatever as long as it structurally holds. Be extra careful when removing the supports especially around the fork tips as it's quite thin and can bends quite easily.

Everything is for non-commercial use :)

Category: Art

Tagi