My version of a Simple Cord Cleat
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted to create a cleat to tie a rope off in my workshop that would take regular woodworking/chipboard screws.
- Ocena
- 5 / 5
- Polubienia
- 22
- Pobrania
- 111
- Wydruki
- 2
- Wyświetlenia
- 419
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
I wanted to create a cleat so that I could tie a thin rope off in my workshop and found this one: https://www.thingiverse.com/thing:2298763. I liked the simple design but I wanted one that would fit standard chipboard screws so I whipped up my own version in Fusion360 - I've included the file in case you want to adjust the dimensions for yourself - the main ones are in the parameter settings.
The dimensions I have used are 12mm wide X 70mm long x 17mm high.
I printed it in PLA at 100% infill with several perimeters to give it plenty of strength.