Tally Light (Wemos D1 Mini and NeoPixel)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This was my first try at designing a tally light case to use with Tally Arbiter software at my church. The case was…
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 86
- Wydruki
- 1
- Wyświetlenia
- 1124
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
This was my first try at designing a tally light case to use with Tally Arbiter software at my church.
The case was designed to use-
- Wemos D1 Mini - Amazon
- NeoPixel Stick - Adafruit
Misc parts and pieces-
- 3- 6.5mm x 2.5mm magnets
- 2- M2 x 8mm
- 2- M2 Nuts
- 3- Short pieces of wire
The cameras we use are mounted to the underside of the balcony with poles and have a steel plate that the magnets attach too and hold the tally light in place. The cameras also have a usb port that allows me to power the tally light without any battery or external power supply.
I installed a slightly modified version of Noah Callaway script on the wemos to display preview and program output. I added startup feedback that flashes the neopixels during the startup and lights up solid when they finally connect to the wifi.
Print Settings
Printer Brand:
Prusa
Printer:
Prusa Mini+
Rafts:
Yes
Supports:
No
Filament: ProtoPasta HTPLA
Category: Other