Foxeer Mini Protective Cam Mount (Mark4 7" Edition)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a high-durability, lightweight camera mount designed for the Foxeer Mini (22mm) series.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 75
- Wydruki
- 0
- Wyświetlenia
- 217
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a high-durability, lightweight camera mount designed for the Foxeer Mini (22mm) series, tailored specifically for the Mark4 7-inch frame.
This model uses a Direct-Bolt Pivot system. The camera angle is adjusted simply by loosening the side bolts, tilting to your preferred degree, and tightening them back down. This keeps the center of mass tight and the part extremely resilient.
🛡 Built-in Protection
The front of the mount is designed as a hardened bumper. It extends past the lens of the Foxeer Mini to provide:
Impact Shielding: Takes the hit so your lens doesn't.
Standoff Support: Bridges the front standoffs of the MK4 for added frame rigidity.
🛠 Hardware Specifications
Frame Mounting: Fits standard Mark4 front standoffs (approx. 20-22mm spacing).
Adjustment Bolts: Designed for M2 or M3 hardware (depending on your specific Foxeer camera threads).
Angle Range: Supports roughly 0° to 60° (perfect for long-range cruising or fast FPV).
🖨 Recommended Print Settings
This part must be printed in TPU for it to function as a protector. A rigid material like PLA or PETG will transfer the impact energy directly to the camera's electronics.
Happy flying! If this mount saved your camera in a crash, please post a photo of the "Make" and let me know!