Festool Systainer 3 lid inlay template
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This allows you to create inlays for the Systainer DF M lids.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 239
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
After making the organisers for the small systainers, I also wanted to organise my drill bits in normal-sized systainer lids. So, I made this because I couldn’t find any template cutouts that covered most of the nooks and crannies of the Systainer lids. With this, you should also be able to make a cutout for any combination of bits.
The inlay is a press-fit, but since there's relatively little space to get it out, you might destroy it in the process.
I had to split the file in half in the slicer since my print bed is not large enough; however, you only need to do this if your print bed is smaller than 266mm in its largest dimension.
If you use these to create inlays that could be useful to others, please A. post it online for others to enjoy, and B. link back to this template so that even more people get to create their own.