1 / 1
Prusa Core one and Core one L Waste Ramp
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
made so you can sweep out waste from the base of the printer and stop it catching on the lip under the door.
- Ocena
- 4,667 / 5
- Polubienia
- 25
- Pobrania
- 85
- Wydruki
- 4
- Wyświetlenia
- 1238
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 4) (Komentarze: 8)Remiksy (1)Kolekcje (81)Powiązane
Small ramp to prevent waste catching on the lip under the door. This is only 1.4-1mm thick so will difficult to print. it slips over the 2 screws to just rest in place. no need to undo the bolt.
I have added a version that is compatible with my other upgrades (dust covers)
THIS PART IS UNTESTED FOR FITMENT (it was modelled using the original Prusa models)