1 / 4
Tobii Eye Tracker 5 Center Mount for ASUS XG27AQDMG — zdjęcie 1
1 / 4

Tobii Eye Tracker 5 Center Mount for ASUS XG27AQDMG

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Center mount for Tobii Eye Tracker 5 on ASUS XG27AQDMG and similar monitors.

Ocena
0 / 5
Polubienia
0
Pobrania
29
Wydruki
0
Wyświetlenia
263
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Short Description

A mounting bracket for the Tobii Eye Tracker 5 designed for the ASUS XG27AQDMG monitor (and similar models). It positions the eye tracker perfectly centered on the monitor for a clean and flush fit.


Features

  • Designed for Tobii Eye Tracker 5

  • Fits ASUS XG27AQDMG and similar monitors

  • Mounts in the center of the monitor, where the ROG logo is located

  • Side grooves help align the original metal mounting strip from Tobii

  • Ensures a perfect center position

  • Allows the lower edge of the eye tracker to sit flush between the printed part and the tracker


Printing

  • Printed in PLA (black, Bambu Lab PLA)

  • Bambu Lab .16 mm Quality preset

  • No additional print setting changes were made


Mounting & Assembly

  1. Attach the metal strip included with the Tobii Eye Tracker to the printed mount using the side grooves for alignment.

  2. Apply double-sided foam adhesive to the back of the printed part.

    • I used 3M VHB acrylic foam adhesive pads (I cut up a spare GoPro adhesive pad)

    • Alternatives can be found online by searching for:
      “3M VHB double-sided adhesive pads, acrylic foam adhesive pads”

  3. Stick the adhesive to the printed part first.

  4. Carefully center the mount on the monitor and press it into place.

Important:
Foam adhesives need time to fully set. I recommend waiting 24 hours before attaching the eye tracker. After this curing time, the mount held securely for me.

I also tried standard double-sided tape without foam, but it did not hold longer than a week.


Notes

  • No permanent modification to the monitor

  • Uses the original Tobii metal strip

  • Easy to reach monitor controls 


Assembly Overview

  • Stick metal strip from the Tobii Eye Tracker to the printed part

  • Apply double-sided foam adhesive

  • Stick the mount to the monitor

Tagi