CR-10 Anti-Vibration Feet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Whilst preparing for the sequel to my popular YouTube video on silencing the CR-10 (https://youtu.be/Vlta31wswAE), I…
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 63
- Wydruki
- 0
- Wyświetlenia
- 721
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
Whilst preparing for the sequel to my popular YouTube video on silencing the CR-10 (https://youtu.be/Vlta31wswAE), I designed these feet for the CR-10 range to dampen noise from vibrations against the table surface.
They make a difference and keep the printer really nice and stable.
I hope you enjoy printing and using my design. To help me keep designing and uploading more things, as well as continue to run my YouTube channel (www.youtube.com/c/3drevolution), please consider making a small donation to me via PayPal: www.paypal.me/JoshForwood
Thank you!
Print Settings
Rafts:
No
Supports:
No
Resolution:
At least 0.2
Infill:
5-10%
Notes:
This is designed to be printed in a flexible filament such as flexible PLA or ninjaflex.
For the infill, if you have S3D, set it to 5% from the bottom up until 5 layers before the base of the "cup" begins (where the printers built in foot will sit), at which point set it to 10%.
If you can't adjust the infill at different layer heights, I'd recommend trying 10% all the way through and seeing how you find it.
Category: 3D Printer Accessories