Sim Racing Handbrake – Load Cell
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sim racing handbrake with load cell.
- Ocena
- 0 / 5
- Polubienia
- 22
- Pobrania
- 114
- Wydruki
- 0
- Wyświetlenia
- 940
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
This project is a remix of the mentioned potentiometer-based sim racing handbrake, upgraded to use a load cell for force-based measurement instead of position-based input.
The result is a much more realistic handbrake feel, similar to real hydraulic handbrakes used in motorsport.
Compatible with Arduino Uno using UnoJoy
Adjustable stiffness depending on spring and preload
Uses mostly 3D-printed parts
Hardware used:
Load cell (typically 10–50 kg (https://www.sparkfun.com/load-cell-10kg-straight-bar-tal220.html#content-features))
HX711 load cell amplifier
Springs (user preference)
2xM4x18 bolts
6xM5x18 bolts + 4xM5 nut
3xM5x70 bolts + 3xM5 nut
3xM8x30 bolts + 3xM8 nut
M8x70 bolt + M8 nut
Arduino with USB cable
Firmware:
Arduino Uno flashed with UnoJoy (see unojoy instructions: https://github.com/AlanChatham/UnoJoy)
Calibration:
Windows Game Controller settings
In-game control settings
Tested with Assetto Corsa
Disclaimer:
This is a DIY project. Assembly and use are at your own risk. Ensure proper wiring and secure mounting before use.