Star Wars Griff Halloran's Racer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Model of Griff Halloran's Racer from Star Wars: Resistance
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 97
- Wydruki
- 0
- Wyświetlenia
- 244
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles & Machines
- Licencja
- Creative Commons — Attribution
This is the racer flown by ace pilot Griff Halloran in Star Wars: Resistance. Griff was a former imperial pilot who, despite his desertion, built his racer and his public persona around his former service.
Dimensions
Length | Width | Height |
|---|---|---|
61.9mm | 33.6mm | 14.7mm |
The version with pin is compatible with a slanted pin and small base (link).
Print Instructions
Print either griff halloran-print.stl (no pin) or griff halloran-pin.stl (with pin, shown in photos).
Printed at 0.10mm layer height. Requires supports on buildplate.
If you want to support me, you can do so via this link: https://ko-fi.com/printingdaniel#