1 / 1
Dust Port for 2.5" Hose - Grizzly G0948 Bandsaw
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement dust port for a Grizzly G0948 bandsaw. Port will fit a standard 2.5" dust collector.
- Ocena
- 5 / 5
- Polubienia
- 0
- Pobrania
- 7
- Wydruki
- 1
- Wyświetlenia
- 60
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
This replaces the factory dust port on a Grizzly G0948 bandsaw. It will fit a standard 2.5" dust hose. It uses the screws from the original dust port.
This can be printed with no supports on a Prusa MK3S.