5 Gallon Bucket Spout with Lid Update
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Updated to the screw on 5 gallon bucket pour spout with lid.
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 63
- Wydruki
- 1
- Wyświetlenia
- 221
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This model is an update to the screw on pour spout for a 5 gallon bucket I previously posted. This spout installs from the inside of the bucket lid and a nut to secure it in place.
Updates include adding tabs to the nut to allow it to be tightened by hand. I also added tabs to the lid to make it easier to grip when opening. Additional threads were added. The cap was shortened so it would not bottom out on the nut. The taper was shortened to reduce the surface area and help keep the lid from sticking if the paint is not cleaned off. The threads remained the same pitch as the previous design so the nut and lid will work on either spout.
The cap was made long to make cleaning off the spout easier. The cap is tapered and seals at the top preventing getting all over the spout.