1 / 7
Casiotone MT-240 Battery Cover (should also fit MT-105, 205, 820) — zdjęcie 1
1 / 7

Casiotone MT-240 Battery Cover (should also fit MT-105, 205, 820)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a battery compartment cover for a Casiotone MT-240 keyboard. I could not find a suitable 3D model for this so…

Ocena
0 / 5
Polubienia
1
Pobrania
14
Wydruki
0
Wyświetlenia
46
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution

This is a battery compartment cover for a Casiotone MT-240 keyboard. I could not find a suitable 3D model for this so I got out my calipers, took a bunch of measurements, and designed this one from scratch. It took a few iterations, but I finally arrived at a design that works very well.

This should also work with MT-105, MT-205, and MT-820 keyboards (and possibly others). Its primary dimensions are 79.5 mm x 33.7 mm.

This was printed using Creality PETG filament with standard settings using my QIDI Tech Q1 Pro. Organic supports and 15% rectilinear infill settings were used. While it is tempting to print this laying flat on the bed, the latch strength will be dependent on layer adhesion and will easily break (in my experience). For this reason, print it on its edge for the best results.

This was designed using Onshape and is public. Using your free account, you can copy the design and modify it if desired. Or you can just look at the methods used to create these designs. The link to this design for public 3D viewing or copying is:

https://cad.onshape.com/documents/b0c64d9c5b35ff2f87663632/w/3204494071764e5118a321b7/e/6d626464e22867a503f12fb7?renderMode=0&uiState=6951b019d4e8d6a95fc26283

This design is public and there are no restrictions on its use for any purpose, with proper attribution.

Category: Other

Tagi