Protectli VP2440 10" Rack Mount (1.5U/1U)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Rack mount for Protectli VP2440 Firewall box.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 50
- Wydruki
- 0
- Wyświetlenia
- 390
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
a rack for the VP2440. I did not see anyone else design one yet so I made it. It is my first 3d model with fusion so will be updating it as feedback is received. Designed so that the protectli sits at the top of a DeskPi Rack. At the top of the rack, it will just barely take up a little more than 1U, since the protectli fins will take up the empty space above the rack mount holes. otherwise takes up 1.5U
Designed such that the Protectli is slightly offset from the front which allows it to sit behind the front header of the deskpi rack. the right compartment is for the protectli power supply.
I have a non-offset version as well that is 10mm shorter if people are interested
I used PETG 30% infill gyroid, 4 wall loop. however it will probably work/print fine with the default 15% infill and 2 wall loops.
Print as oriented, no supports