Simple 3DOF Stewart Platform
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
It's a 3DOF steward platform. It can tilt in two directions and move up/down. Only 3 servos and 2min of assembly needed.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 216
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
It's a 3DOF steward platform. It can tilt in two directions and move up/down.
The main platform consists of two pieces (BotPlate & TopPlate) that fit on one build plate.
Assembling it is just fastening the nine screws of the three SG90 servos and done :)
I made attachments to have an empty plate and a maze on top, to balance a ball or navigate it trough a maze.
There is also the option to have a camera 30cm over the top plate. The cutout there fits a Adafruit 5733 camera.
It is part of a bigger project, where I balance balls and navigate mazes using Reinforcement Learning: https://github.com/ValentinBhend/RealGym
Print instructions:
For the BambuLab A1 using Bambu Studio the only crucial setting is: Use tree support and set "Support critical regions only".
The Maze Plates and the Holder were done using ironing. I have yet to find the optimal settings there.