Rotating End Stop for 8020 rail
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This print attaches to a 1010 t-slot rail to provide a locking end stop, enabling quick, repeatable cuts on a miter saw.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 33
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Print all parts
Place Pin inside Enclosure Block with the holes aligned
Snap L and R arms onto pin. Should be interference fit, but glue is optional if you have a loose fit.
Thread 1/4-20 rod through both arms for extra rigidity
Attach end stop to t-slotted rail with your preferred t-nut and bolt.
Be sure to size the bolt and t-nut correctly to ensure the head of the bolt does not interfere with the rotation of the pin. 1/2" long, button head screw works for me.
The end stop can rotate up and out of the way. When you need to engage the end stop, just rotate it down. Macro adjustments can be made by loosening the t-nut and sliding the end stop on the rail. Micro adjustments are made by turning the threaded rod. One rotation of the threaded rod is .05 inch or ~1.25mm