Cord Wrap for KitchenAid Pro 600 Series
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Strong rear‑mount cord wrap for KitchenAid Pro 600 mixers. Prints cleanly with no supports needed.
- Ocena
- 0 / 5
- Polubienia
- 193
- Pobrania
- 281
- Wydruki
- 0
- Wyświetlenia
- 2497
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
This printable cord wrap is designed specifically for the KitchenAid Professional 600 Series stand mixers, including the KP26M9XCOB and other 6‑quart bowl‑lift models with the same rear housing shape.
The mount attaches to the back of the mixer and provides a clean, simple way to store the power cord when the mixer isn’t in use. No drilling, no hardware — just print, stick, and wrap.
Features
Designed for Pro 600 Series mixers (6‑Qt bowl‑lift)
Orientation arrow molded into the concave surface to ensure correct installation
Rear‑mount design keeps the cord tidy and off the countertop
Smooth, rounded edges to prevent cord wear
Tool‑free installation using flexible double‑sided tape
Print‑friendly geometry with no supports required
Installation
Apply flexible double‑sided tape to the flat back of the cord wrap.
Align the arrow pointing upward.
Press firmly into place.
Wrap the cord around the mount and enjoy a cleaner countertop.