Parametric Desk shelf | Hutch
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Parametric Desk shelf made in FreeCAD. Legs are attached with M4 heat inserts and M4 screws.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 43
- Wydruki
- 0
- Wyświetlenia
- 365
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Public Domain
Little Desk shelf (hutch) I made in FreeCAD. The provided step files max out the core one print volume.
I printed this using PETG. No supports required. Would recommend a brim for the legs so they dont fall over while printing. The spacers and leg socks I printed from TPU, you dont strictly need them. Neither are the Reinforcement Bars required. Depending on how big the top plate is you may want them for additional stability. They are held on with the rubber feet so you need the feet to use the Reinforcement bars. The spacers go between the legs and the top plate.
You will require
4 m4 heat inserts
4 m4 screws (used m4x12, but m4x8 screws are long enough)
FreeCAD parameters (NOTE: FreeCAD takes quite some time recomputing everything after every parameter change as it recomputes the hex pattern)
Most likely to change
Width / Height: dimensions of the plate
Margin: Solid Border size, this will also effect the size of the legs
Leg Length: height of the Legs
Screw compatibility
Heat insert Diameter
Heat insert Length
Screw Diameter
Screw Head Diameter
Screw Head Height
Leg Screw Length: Additional space to allow for screws longer than the heat inserts