1 / 4
MN82S Trailer Hitch with steps for lifted body with trailer mount — zdjęcie 1
1 / 4

MN82S Trailer Hitch with steps for lifted body with trailer mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Remixed the model to fit on MN82S with a body lift. Also added accesory for trailer mount.

Ocena
0 / 5
Polubienia
9
Pobrania
52
Wydruki
0
Wyświetlenia
464
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Share Alike

This model solves three things:

  1. Mount hitch to a MN82S with a body lift

  2. Steps not interfering with trailer drawbar from model https://www.printables.com/model/1464212-trailer-for-mn82-rc-land-cruiser-116

  3. Strong and reliable trailer mount

For the trailer mount I added a M3 heat insert into the hole and screwed in a M3x16 bolt. On the bolt I put a 4.9mm wide and 5mm high sleeve that allows hooking a trailer with 5mm hole in the drawbar. On the top of the screw i put a ball with another heat insert that is tightened to the sleeve and secures the trailer while allowing to to move freely.

The ball is comically oversized now, I will try to make it smaller with another update if it works.

05/01/2026 - uploaded new version of the towbar where the hitch is mounted lower than the steps. Not only it looks better, but it also creates less strain and allows more trailer movement.