Updated Vz235 Mellow Radiator Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed to support the latest Mellow water cooling kit
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 70
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Made some adjustments to the model made by Prints Frankv to better fit the latest Mellow 120mm water cooling kit. Screw holes were changed into slots for example, and there is also room added for hoses to pass through behind the radiator. I also widened the vertical braces so that the fan could fit between them, if desired.
As with the original model, I recommend printing in a good sturdy material with mild heat resistance. PA6-CF or ABS is preferred but PETG will work in a pinch (though it may flex a bit).
The radiator can be mounted on top of the bracket or on the underside, whichever you prefer (as long as it doesn't interfere with your exhaust fans obviously).