Jager mini bottle gun toy
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A gun shaped toy that houses 3 mini Jager bottles.
- Ocena
- 0 / 5
- Polubienia
- 35
- Pobrania
- 120
- Wydruki
- 0
- Wyświetlenia
- 1454
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution — Noncommercial
inspired heavily by:
https://www.printables.com/model/1514460-jagerglock-the-mini-jager-holder/comments
I liked the concept but wanted it to be reusable, and for the most part, drunk proof since I intended to give them away as gifts.
it requires 3M screws; 5x 20mm + 1x 12mm. but pretty much any 3M screws long enough to interface both halves of the lowers will suffice.
all 3 bottles are accessible without removing any screws, all bottles snap into place (quite satisfyingly I might add). Parts should require little to no sanding assuming your printer is dialed in enough.
The mag cover isn't actually necessary as the lower bottle stays in place without it, but I added it for some protection and visual aesthetic.