1 / 1
2.4 and 5.8 ghz Corner Reflector for Wifi Access Point — zdjęcie 1

2.4 and 5.8 ghz Corner Reflector for Wifi Access Point

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

In the tradition of Freeantennas.Com, I've uploaded a Corner Reflector which should fit most antennas found on most…

Ocena
0 / 5
Polubienia
1
Pobrania
10
Wydruki
0
Wyświetlenia
86
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Office
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

https://freeantennas.com/projects/Ez-10/index.html

In the tradition of Freeantennas.Com, I've uploaded a Corner Reflector which should fit most antennas found on most Wifi Access points. I've also included the OpenScad source code so you can customize it however you would like.

In theory adding this to one antenna on your access point should increase signal strength in the favored direction by about 10 dBi on all bands. Adding additional reflectors to the other antenna(s) will yield an additional 3 dBi for the second antenna and 3 more dBi for the last two antennas. This presumes an AP with 4 antennas. That is quite a lot of improvement.

In practical use it will get you about double the range you had before you added the antennas.

How to use it? Print it. It is a framework upon which you will add a reflective metal (aluminium foil) reflector. So print it and glue or tape aluminium foil to the back side of the corner only. No foil needs to be added to the brackets or anywhere else.

There is a web site at freeantennas.com which explains the principle upon which this reflector was designed. I just decided to update what I did there in plastic here.

Please enjoy and comment about your results here.

Category: Office

Tagi