1 / 10
Mikrotik RB711 Indoor Enclosure with Reflector
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I needed about fifty of these so I drew one up. I usually use PETG but use what you want. Feet are also included and…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 31
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
I needed about fifty of these so I drew one up. I usually use PETG but use what you want. Feet are also included and you can hang it on the wall and cover the reflector with aluminum tape (used in duct work) to enhance coverage into whatever area of the premises you wish. There is an outdoor enclosure for the RB711 also. See my "things". The OpenSCAD which produces this is included.
I have included my PayPal address, ;)
Category: Electronics