1 / 1
Bowden holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bowden cable holder up to 5 mm cable diameter
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 109
- Wydruki
- 3
- Wyświetlenia
- 516
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 3) (Komentarze: 3)Remiksy (0)Kolekcje (14)Powiązane
The bowden cable holder can be printed from PLA and PET. The holder is designed for bowdens with a diameter from 4 mm to 5 mm.
I recommend PET printing, due to better properties. With PLA, there is a high risk of damage to the holder when using a bowden cable with an upper limit diameter.
The screw hole is designed for m2 with countersunk head or m3 without countersunk head
Print settings:
Layer: 0.20
Material: PET or PLA
Filling: 10 - 15%
Supports: none